This pump is designed for lifting fluids from below ground level or from a sump. It is suitable for clean fluids or slightly contaminated liquids such as effluent, cleaning products, chemicals and hydrocarbon. The design standard used is API 610/682 especially for the petroleum industries. A magnetically coupled version is available. The maximum depth is 10 m. The impeller used is closed impeller with back vanes providing balancing of axial loads. A half open impeller with wear plates can be available. The standard sealing is oil seals but mechanical selas or gland packing is available. A vapor tight rectangular or circular mounting plate or pressurised design is optional. Motors can be standard IEC or ATEX design. Maximum capacity is 1500m3/hr and pressure 35 bar. Maximum liquid temperature is 160 bar.