mobile-process
 
 

On-line TOC, BORON Analyzers

InnovOx Total Organic Carbon (TOC) Analyzers

Sievers InnovOx Laboratory Total Organic Carbon (TOC) Analyzer

REQUEST QUOTATION

The Sievers InnovOx Laboratory Total Organic Carbon (TOC) Analyzer represents a true breakthrough in high TOC measurement technology and reliability. The InnovOx (short for innovative oxidation) can consecutively handle thousands of common—as well as difficult samples such as brine and cellulose—with unprecedented system uptime. The InnovOx offers unparalleled oxidation robustness, a dynamic linear working range of 0.5 to 50,000 ppm, and calibration curve stability for TOC analysis of industrial waste and environmental or process water samples.

Supercritical Water Oxidation (SCWO) Technique

GE Analytical Instruments' patented Supercritical Water Oxidation (SCWO) technique enables the InnovOx to achieve its superior analytical performance and unsurpassed calibration stability. Using an oxidation process in a supercritical state has shown superior TOC recoveries across a broad range of organic compounds and particulate impurities. This new process removes sample and precipitated impurities between each analytical run, eliminating sample matrices contamination and providing reliable, long-term system performance.

Versatile Measurement Modes

With the InnovOx, analysts can routinely test for Total Carbon (TC), Total Inorganic Carbon (TIC), Total Organic Carbon (TOC), and Non-Purgeable Organic Carbon (NPOC). The InnovOx software provides versatile analysis options such as multiple runs on the same sample, auto calibration range selection, and integration with the GE Autosampler.

Declaration of Conformity

Click here for the Declaration of Conformity.

The Sievers InnovOx Laboratory Total Organic Carbon (TOC) Analyzer offers the following key features and benefits:

Unprecedented Uptime and Reliability

The Sievers InnovOx was designed to address two primary requests from the wastewater marketplace - improved reliability and uptime. Today, the InnovOx delivers on this promise. The Sievers InnovOx features an innovative Super Water Oxidation (SCWO) technique which allows it to provide unprecedented uptime and superior reliability. The InnovOx has been demonstrated to run thousands of diverse sample matrices without any need for time-comsuming reactor cleaning or expensive catalyst replacement.

Sample Handling Robustness

With the SCWO technique, the Sievers InnovOx has advanced standard wet chemical oxidation to achieve unprecedented TOC recoveries regardless of organic compounds and particulate impurities in the sample. The Sievers InnovOx is tough. It can handle a wide variety of sample matrices, notably those with brine, cellulose and other challenging sample content.

Versatile Measurement Modes

The Sievers InnovOx TOC Analyzer offers various measurement modes, including:
  • Total Carbon (TC)
  • Total Inorganic Carbon (TC-IC)
  • Total Non-Purgeable Organic Carbon (NPOC)
  • Total Organic Carbon (TOC)

Extended Calibration Stability

The InnovOx offers up to six months' calibration stability. Calibration is easily performed using intuitive on-screen prompts. Multi-point calibrations can be performed with a single standard using the Auto Dilution capability.

Ease of Operation

Like other Sievers TOC Analyzers, the Sievers InnovOx is very easy to use and features an intuitive touch-screen display. Conveniently, the InnovOx starts up immediately, since it does not require any prior warm-up or stabilization.

Low Maintenance and Cost of Ownership

Generally requiring just a few hours of preventive maintenance a year, the InnovOx is very easy and inexpensive to maintain.

Web-based Monitoring

The InnovOx enables users to remotely monitor and control InnovOx operations and results using a secure Web-based, Ethernet interface. Data can also be downloaded and transferred via a USB port.

Regulatory Methods Compliance

The InnovOx is compliant with ASTM, Standard Methods, ISO, and EPA regulations.

Operating Specifications*
Analysis Modes TIC, NPOC, TC, TOC (TC-TIC)
Dynamic TOC Range Up to 50,000 ppm
Limit of Detection (LOD) 0.05 ppm NPOC
Accuracy** ± 3%
Precision** RSD ≤ 1.5%
Linearity R2 ≥ 0.995, measured as NPOC
Analysis Time 2.6 to 9.2 minutes in on-line mode
Calibration Stability Up to 6 months
Particle Diameters in Sample

≤ 800 µm diameter without filtration

Ambient Operating Temperature Range 10-40 °C (50–104 °F)
Maximum Relative Humidity Up to 95%, non-condensing
Sample Temperature Range 10-60 °C (50–140 °F)
Sample Inlet Pressue Ambient
Drain Gravity drain
Analyzer Specifications
Outputs Ethernet and 3 USB
Display Color, touch-sensitive LCD
Power 100–240 ± 10% VAC, 400 W, 50/60 Hz
Dimensions H: 52.05 cm (20.49 in); W: 32.26 cm (12.7 in); D: 58.42 cm (23.0 in)
Weight 22.4 kg (49.4 lb)
Safety Certifications CE, ETL listed. Conforms to UL Std. 61010-1. Certified to CSA C22.2 No. 61010-1. see Declaration of Conformity
Consumables
Acid Reagent As needed, typically 6 months (285 mL)
Oxidizer Reagent As needed, typically 30-day stability
Reagent Grade Water As needed
Air Filter Cartridge 3 months
Pumps 24 months
Sample Flow Path Tubing 6-12 months
Valve Seals (2) Up to 3 months of operation, depending on sample matrix

 

* Stated analytical performance is achievable under controlled laboratory conditions that minimize operator and standards errors.
**
Measured at 25 ppm NPOC or TOC