mobile-engineering
 
 
Fluid Handling and Process Equipment including
  • Sanitary Centrifugal & PD Pumps
  • Dispersion Equipment - Colloid Mill
  • Votator II
  • CR Mixer

Valves

Over-Pressure Relief Single Seat Valves - WR60/WR80 Series

REQUEST QUOTATION

Enhance your pump with an external over-pressure relief valve. If pump discharge pressure exceeds the set cracking pressure, the valve will open to a relief path.

The Adjustable-Spring actuator lets you set the desired relief cracking pressure right at the valve by simply turning the adjustment screw (see graphics above). Three diameters are available: 4", 5" and 6" (102mm, 127mm and 152mm) for both air-to-raise (AR) on 1.5" – 4" (38mm - 102mm) W61 valves and air to lower (AL) on 2" - 4" (51mm - 102mm) W63 valves. Tef-Flow PEEK™ or metal seats are required for strength and durability.

For clean-in-place applications (CIP), a piston in the actuator allows opening of the valve without having to over pressure it. After relieving or CIP is complete, the valve reseats in place.

  • Exterior adjustment with sealed cap to safeguard threaded area, no exposed threads.
  • Positive-Stop prevents overloading of spring and engages with the sealed cap to lock in the setting.
    • Cracking pressure adjustment ranges from zero (fully unloaded) to maximum published holding pressure of standard, heavy-spring actuators.
  • Piston for full opening/by-pass
    • Heavy-duty construction with (3) bearing locations and sealed, welded construction
 
 
 
Upcoming Events