mobile-engineering
 
 
Fluid Handling and Process Equipment including
  • Sanitary Centrifugal & PD Pumps
  • Dispersion Equipment - Colloid Mill
  • Votator II
  • CR Mixer

Pumps

Universal 2 Series- Automative Paint Pumps

REQUEST QUOTATION

A modification of the Universal 2 positive displacement pump, this pump is manufactured specifically for paint re-circulation in the automotive industry.

  • Manufactured and tested with non-silicone lubricants
  • Maximum pressure: 200-300 psi (13.8-20.7 bar), depending on model
  • Temperature ranges: -40°F (-40°C) to 300°F (149°C)
 

Pump Comparisons

 
Requirements
Waukesha
Turbine
Piston
Eliminates surge suppression
YES
YES
NO
Constant flow regardless of system pressure changes
YES
YES
YES
Minimal heat input
YES
NO
YES
Variable speed drive options
YES
NO
YES
Energy efficient
YES
NO
NO
Easily repaired
YES
NO
NO
Easily maintained
YES
YES
NO
Prevent metallic flake degradation
YES
NO
YES
This positive displacement pump is manufactured specifically for paint re-circulation in the automotive industry.
 
 

MODEL

DISPLACEMENT
PER REVOLUTION

NOMINAL
CAPACITY TO

INLET/
OUTLET

PRESSURE
PSI

MAX
RPM

TEMP
RANGE

006-UII-AP .008 GAL. (.03 Liter) 6.6 GPM (1.5 m³/hr.) 1" 300 900 -40° F
(-40° C)
to
300° F
(149° C)
015-UII-AP .014 GAL. (.05 Liter) 9.9 GPM (1.8 m³/hr.) 1" 250 800
018-UII-AP .029 GAL. (.11 Liter) 17.4 GPM (3.9 m³/hr.) 1" 200 700
030-UII-AP .06 GAL. (.23 Liter) 36 GPM (8.2 m³/hr.) 1" 250 600
060-UII-AP .15 GAL. (.57 Liter) 90 GPM (20.4 m³/hr.) 2" 250 600
130-UII-AP .25 GAL. (.95 Liter) 150 GPM (34.1 m³/hr.) 3" 200 600
220-UII-AP .52 GAL. (1.93 Liter) 312 GPM (68.1 m³/hr.) 4" 200 600
 
 
 
Upcoming Events