mobile-engineering
 
 

Separation, Screening, Grinding, Finishing Equipment

Vibro-Energy® Finishing Mill

Finishing Mills Long Radius Series

REQUEST QUOTATION

Finishing Mills Long Radius Series
SWECO Vibro-Energy Finishing Mills perform the complete spectrum of finishing parts from rough to delicate. Included are deburring, flash removal, edge-breaking, metal clean-up, rough surface work, prepaint finishing, descaling, burnishing, chemical treating, special surface effects, and the development of reflectivity. They are also ideal for ball burnishing.

The Long Radius Series contain mills with capacities ranging from 1 to 24 cubic feet. That's 300 to 7,200 pounds of load capacity. These mills can process parts as large as 36 inches long. They also have special features for low noise operation and minimum vibration transfer to the floor. The series has an improved internal parts/media separation system that installs quickly for faster unloading.
FMD-1LR
Capacity 1 ft³ (300 lbs. load capacity)
Maximum Straight Part Length 9 inches
Motion Generator 1/3 hp, TENV, 1200 RPM, single phase 115 volt; 3-phase 230, 460 or 575 volt. 60 Hz. (non-reversing)
Vibralite Bowl Chamber - all cast polyurethane elastomer with ¾" minimum thickness in high wear areas
Shipping Weight 195 lbs. (empty)
 
FMD-3LR
Capacity 3 ft³ (900 lbs. load capacity)
Maximum Straight Part Length 15 inches
Motion Generator 1 ¼ or 2 ½ hp, TENV, 1200 RPM, 3-phase 230, 460, or 575 volt. 60 Hz. (non-reversing)
Lining Abrasion-resistant lining of cast polyurethane with ¾" minimum thickness in high wear areas.
Shipping Weight 850 lbs. (empty)
 
FMD-4LR
Capacity 4 ft³ (1200 lbs. load capacity)
Maximum Straight Part Length 18 inches
Motion Generator 2 ½ hp, TENV, 1200 RPM, 3-phase 230, 460, or 575 volt. 60 Hz. (non-reversing)
Lining Abrasion-resistant lining of cast polyurethane with ¾" minimum thickness in high wear areas.
Shipping Weight 960 lbs. (empty)
 
FMD-7LR-2
Capacity 7 ft³ (2100 lbs. load capacity)
Maximum Straight Part Length 20 inches
Motion Generator 5 hp, TENV, 1200 RPM, 3-phase 230, 460, or 575 volt. 60 Hz. (non-reversing)
Lining Abrasion-resistant lining of cast polyurethane with ¾" minimum thickness in high wear areas.
Shipping Weight Approximately 1620 lbs. (including control panel)
 
FMD-10LR
Capacity 10 ft³ (2500 lbs. load capacity)
Maximum Straight Part Length 24 inches or more, depending on part cross-section and batch size
Motion Generator 5 hp, TENV, 1200 RPM, 3-phase 230 or 460 volt. 60 Hz.
Lining Abrasion-resistant ¾" Cast Polyurethane
Shipping Weight Approximately 1025 lbs.
 
FMD-14LR
Capacity 14 ft³ (4200 lbs. load capacity)
Maximum Straight Part Length 24 inches
Motion Generator 5 hp, TENV, 1200 RPM, 3-phase 230, 460, or 575 volt. 60 Hz. (reversing)
Lining Abrasion-resistant lining of cast polyurethane with ¾" minimum thickness in high wear areas.
Shipping Weight Approximately 2250 lbs. (including control panel)
 
FMD-24LR
Capacity 24 ft³ (7200 lbs. load capacity)
Maximum Straight Part Length 36 inches
Motion Generator 10 hp, TENV, 1200 RPM, 3-phase 230, 460, or 575 volt. 60 Hz. (reversing)
Lining Abrasion-resistant lining of cast polyurethane with ¾" minimum thickness in high wear areas.
Shipping Weight Approximately 3800 lbs. (including control panel)
 
 
 
Upcoming Events