mobile-engineering
 
 

Separation, Screening, Grinding, Finishing Equipment

Vibro-Energy® Finishing Mill

Finishing Mills Batch Series

REQUEST QUOTATION

Finishing Mills Batch Series
SWECO Vibro-Energy Finishing Mills perform the complete spectrum of finishing parts from rough to delicate. Included are deburring, flash removal, edge-breaking, metal clean-up, rough surface work, prepaint finishing, descaling, burnishing, chemical treating, special surface effects, and the development of reflectivity. They are also ideal for ball burnishing.

The Batch Series contain mills with capacities ranging from 1.2 to 20 cubic feet. That's 360 to 6,000 pounds of load capacity. These mills can process parts as large as 30 inches long. There is an open top for visual inspection or parts retrieval without stopping the process, and there is no transmitted vibration to the floor. Additionally, they have a higher capacity per horsepower than other types of vibrating units.
FM-1.2C
Capacity 1.2 ft³ (300 lbs. load capacity)
Maximum Straight Part Length 9 inches
Motion Generator 1/3 hp, TENV, 1200 RPM, single phase 115 volt; 3-phase 230, 460 or 575 volt. 60 Hz.
Vibralite Bowl Chamber - all cast polyurethane elastomer with ¾" minimum thickness in high wear areas
Shipping Weight 210 lbs. (empty)
 
FM-3C & FM-3HA
Capacity 3 ft³ (900 lbs. load capacity)
Maximum Straight Part Length 12 inches
Motion Generator 1 ¼ hp, TENV, 1200 RPM, 3-phase 230, 460, or 575 volt. 60 Hz.
Lining 5/16" Cast Polyurethane Elastomer
Shipping Weight Approximately 550 lbs.
 
FM-10V & FM-10C
Capacity 10 ft³ (3000 lbs. load capacity)
Maximum Straight Part Length 24 inches
Motion Generator 5 hp, TENV, 1200 RPM, 3-phase 230, 460, or 575 volt. 60 Hz.
Lining ¾" Cast Polyurethane Elastomer
Shipping Weight Approximately 1175 lbs.
Model FM-10C available with curved outer chamber wall.
 
FM-20HA
Capacity 20 ft³ (6000 lbs. load capacity)
Maximum Straight Part Length 30 inches
Motion Generator 10 hp, TENV, 1200 RPM, 3-phase 230, 460, or 575 volt. 60 Hz.
Lining ¾" Cast Polyurethane Elastomer
Shipping Weight Approximately 2500 lbs. (including control panel)